Using The Remote Playback - Speco DVRPC16T2TB User Manual

6.4

Using the Remote Playback

To use this feature, first you need to select the source of the file. In the Select Playback Mode dialog box,
choose Local Playback to open the file that is recorded in the Remote Console, and Remote Playback to
open the file that is recorded in the DVR server. When you choose Remote Playback, select RealTime
Playback if your internet bandwidth is fast and big enough, otherwise choose Download and Playback.
Click OK to proceed and Cancel to void this operation.
In the Video Playback Date/Time Selection, the number from 00 to 23 represent the time in 24-hour clock.
The numbers from 01 to 16 represent the camera number. To switch to channel group click Channel 01-16
and Channel 17-32 button but if DVR supports less than 16 channels (include 16 channels) and the channel
group switching buttons are non-functional.
To Make a Selection:
1.
Select the date in the calendar. Use
buttons to shift the calendar to the left or right.
2.
In the table below, click on the blue block to
select and open the recorded file. The blue
block turns red when it is selected. The block
that appears in white doesn't have data. You
can only select one block when you choose
Download and Playback.
3.
Click OK to proceed and Cancel to void this
operation.
4.
If you select Download Playback and after
making the selection, the system divides the
selected hour into 16 video thumbnails. In the
Time Selection screen, click on the video
thumbnail you want to download and open (see
also Chapter 6.4.2).
and
130