Speco DVRPC16T2TB User Manual page 62

(5) Input
Select the type of video camera input you are using.
- Analog Camera
The video source is coming directly from camera that is connected to the SA Series DVR.
- Remote DVR
The video source is coming from another DVR server. In the Remote DVR dialog box, enter the server
IP, port number, user ID, password and select the camera number. If you are not sure of the server IP
and port, please check the DVR server IP address in Network setting.
The audio of remote DVR doesn't support on remote access application such as Remote
i
Console.
- IP Camera
The video source is coming from IP camera. Click IP Setting button to enter the IP Camera Settings
window.
In the Add IPCam dialog box, select to connect using Protocol or URL and then enter the required
information. If the IP camera IP address is available, enter the IP address at IP Camera Site column.
Or User can click Auto Search to find the IP camera that can be detected on the LAN network. If it
requires user identification, enable Authentication check box and enter ID and Password. To enable
audio, click Enable Audio check box. If you are not sure of the Protocol or URL info, please refer to the
IP camera manual or contact your IP camera local distributor. Click Save & Exit to save the setting and
leave the setup windows, but no connection with IP camera. To connect with IP camera immediately,
click Connect button. Click OK to save the setting but not exit the setup windows. To cancel the setting,
click Cancel.
56