Table of Contents
Advertisement
(2) Mail
To check if it is working, click Test Account button.
From:
Enter the sender e-mail address.
To and CC:
Enter the recipient email address and separate it with comma or a semicolon (;).
Subject:
Enter the message title.
Message:
Type the message.
(3) Email Notice Setting
Notice Interval:Set the period of time before it sends another e-mail notice.
-
Embedded image:Select the image size and set the number of frames.
-
Attach image when sensor is triggered:When the sensor is triggered, the system will capture the
-
image and send the image to the certain e-mail address with the alarm message.
(4) Modem Dial up Setting
If you are using dial up modem, enable Auto Dial up check box and select the modem name. You may also
set the time to disconnect automatically, just enable the Auto Disconnect after check box and set time.
4.9.4
To Setup FTP Setting
1.
Next to the File Transmission via FTP check box, click Detail.
2.
In the FTP Setting dialog box, enter the FTP IP, port, user ID and password.
3.
In Number of Pic text box, enter the number of sequence images that want to send when file is
transmitting.
If user wants to send the recorded image before alarm occurs, enter the time that before alarm
4.
occurs in Before alarm(sec.).
5.
In Upload image when sensor is triggered, select the camera that the images will be captured and
send when the any alarm is triggered. If user select the Alarm Camera, then only when motion trigger,
video loss, missing or suspicious object/scene change will send out the alarm image.
6.
Click OK to exit and save the setting and Cancel to exit without saving the setting.
93
Advertisement
Table of Contents
