Familiarizing The Buttons In Playback Mode - Speco DVRPC16T2TB User Manual

3.3

Familiarizing the Buttons in Playback Mode

To switch in Playback mode, click Playback button at the lower right corner of Preview mode user interface
Name
(1) Split Screen Mode
- If there are only 4 cameras enabled, you won't be able to switch to 9, 13, and 16 split screen mode.
i
- To zoom in an area on the screen, Right click and Drag a square on the area you want to enlarge.
(2) Progress bar
(3) Hour Buttons
The Hour buttons represent the time in 24-hour clock. The blue bar on top of the hour button indicates that
i
there is a recorded video file on that period of time. While the red bar indicates that you are currently viewing
the recorded video file.
(4) Playback Control
Buttons
Function
Select from 6 kinds of split screen type to playback the recorded video file of all the
camera, or one camera over the other or alongside on a single screen.
Show the progress of the file being played. You may move the bar to seek at any
location of the track.
When in single screen playback mode, the colors in progress bar have different means.
 Green color: a motion was detected and recorded
 Blue color: is a general (always) recording file and no any event or motion happen
during recording
 Red color: the sensor was triggered while recording
 Black color: no record file at the time period
 Yellow color: the video loss happen while recording
Select and click to playback the recorded video file on the specific time frame.
From left to right order:
Begin: Move at the beginning of the recorded video file.
Previous: Go back to the previous frame.
Slower: Play the recorded video file at the speed of 1/2x, 1/4x, or 1/8x, 1/16x, or 1/32x.
Rewind: Wind back the recorded video file.
Pause: Briefly stop playing the recorded video file.
18