Table of Contents
Advertisement
(8) Enable Deinterlace
To enhance the video quality. Set the deinterlace mode to #1, if you are capturing motionless picture and
select #2, if it captures lots of movement.
IP Camera
Select the camera from remote DVR servers to modify settings. In the Camera Setting window, click Update
to save and apply the new settings, click Cancel to exit without saving, and click Default1/ Default2 to revert
back to original factory settings.
(1)
(2)
(3)
(4)
(1) Camera Icons
Select the camera number you want to adjust the video setting. To select all the cameras, enable the ALL
check box. To select more than one camera, Right click on the camera icon. To select one camera only, Left
click on the camera icon. The camera icon turns red when it is selected.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disabling it so that the system won't detect it as video loss error.
(3) Camera
-
Covert
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still
record the video and preview it in playback mode.
-
Name
Change the camera name.
-
Description
Add a short comment.
(4) Enable Deinterlace
To enhance the video quality. Set the deinterlace mode to #1, if you are capturing motionless picture and
select #2, if it captures lots of movement.
113
Advertisement
Table of Contents
