Table of Contents
Advertisement
rate setting in
(6) Frame Rate
- Voice Detecting Recording
DVR system will record the sound when the voice exceeds the intensity value in Voice Detection
setting.
- No Recording
The system won't do any recording.
-
KeyFrame Recording
Only record one frame per second.
(3) Motion Detection
Adjust the sensitivity of the motion detector. The higher the value, the finer the sensitivity is detected. When it
detects a motion, a green triangle mark would appear at the upper left corner of the screen.
(4) Voice Detection
Adjust the intensity of the audio detector. The system detects sound when it exceeds the intensity value.
(5) Quality
Adjust the video quality. The higher the value, the lower the compression level and uses more hard disk
space.
(6) Frame Rate
Set the maximum number of frames to be recorded during motion and motionless state. The frame rate
ranges from 1 to 30 for NTSC and 1 to 25 for PAL. The higher the frame rate, it uses more hard disk space.
(7) Video Size
User can activate the Enable Deinterlace to enhance the video quality. Set the Enable Deinterlace mode to
#1, if you are capturing motionless picture and #2, if it captures lots of movement.
(8) Compression Type
H264 is the latest and advanced video compression format that delivers better video quality and smaller file
size but this uses more CPU resource. Advanced MPEG4 provides a standard for color picture compression
rate.
IP Camera
In the Recording setup window, click OK to accept the new settings, click Cancel to exit without saving, and
click Default to revert back to original factory settings
(1)
(2)
(3)
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable the ALL
check box. To select more than one camera, Right click on the camera icon. To select one camera only, Left
click on the camera icon. The camera icon turns red when it is selected.
(2) Recording Mode
section.
.
155
Advertisement
Table of Contents
