Table of Contents
Advertisement
In Camera Setting interface, click Detail to configure more parameters of the camera. Click OK to save
the configuration and exit the setup windows. To reset the configuration back to factory value, click
Default.
User can select Video size, Frame rate, Video and Quality Mode of camera. And scroll the bar to
adjust the Quality, Brightness, Contrast, Hue, Saturation, and Sharpness of the camera.
Recording Setting
- Save Original Format: Save the video that is compressed by IP camera's compress mode.
Preview Setting: preview setting will relate to the Save Original Format.
- Decode key frame only for Preview: When previewing video, DVR system only shows key
frame and one frame per second.
- Enable live display performance optimization: The live video performance will be optimized
while display.
- Enable update when motion: The video will update only when compare the key frame has
motion found, and then, the video will be displayed.
Schedule Connect
User can select a certain date and time to connect with IP camera. The blue block means connect
with IP camera and the white block means disconnect with IP camera. Select the connection
status (blue or white) and click the date and time block to set the connection schedule.
I/O Control: To setup the sensor and relay devices that is installed on IP camera.
Sensor Setting: To setup sensor that is embedded on the camera.
1.
Click the drop-down list and select the sensor ID number.
2.
Enter sensor name in Name column.
3.
The system automatically detects the camera and input relates information. In the
Content section, enter sensor description.
57
Advertisement
Table of Contents
