Table of Contents
Advertisement
Using the 2 Up Feature
Use the following procedure to make a copy using the 2 Up feature:
1.
If the DP-C106 is in printer mode, press the Copy button to enter copy
mode.
2.
Press the Clear All button to restore default settings.
3.
Position the originals in the ADF with the long edge of the paper entering
the ADF first (Long Edge Feed).
You must use the ADF to create a 2 Up copy. For more information on
positioning originals in the ADF, go to the Basic Copying chapter.
4.
Select the Paper Supply and the % of Reduction/Enlargement required.
Several common sizes are listed below. Use the Zoom feature to
determine the best reduction for other sizes.
8.5 x 11 in. Portrait
8.5 x 11 in. Portrait
8.5 x 11 in. Portrait
A4 Portrait
A4 Portrait
A4 Portrait
5.
Load paper into the Paper Tray by placing the short edge of the paper to
feed into the machine first (Short Edge Feed).
6.
Press the Advanced Features button to display the Advanced Features
selections on the Copier Screen.
7.
Use the (
8.
Press the Select button to display the 2 Up selection on the Copier
Screen.
Original
) ARROW buttons to highlight the 2 Up feature.
Desired 2-Up Output
8.5 x 11 in. Landscape
11 x 17 in. Landscape
11 x 14 in. Landscape
A4 Landscape
B4 Landscape
A3 Landscape
Copy Features
Reduction
64%
100%
75%
70%
86%
100%
45
Advertisement
Table of Contents
