Copy/Print Quality Problems - Panasonic WORKIO DP-C106 Operating Instructions Manual

Copy/Print Quality Problems

Copy/Print Quality Problems
If the problem still exists after following the instructions in this table, call your
local Authorized Panasonic Representative.
Description
Faded print/copy
Stray black dots, or white
dots in solid black or color
areas
Vertical streaks
Horizontal streaks
Repeating defect
Toner smears when
touched
Black pages
Possible Cause
Printer out of adjustment.
The Print/Copy Cartridge is
old or damaged.
If only some colors are
faded, a Toner Cartridge is
old or damaged.
The Document Glass is
dirty.
The drum in the Print/Copy
Cartridge is old or
damaged.
Dirt in the paper path.
The drum in the Print/Copy
Cartridge is old or
damaged.
The Fuser is not operating.
The Print/Copy Cartridge is
old or damaged.
Problem Solving
Action
Go to Adjusting the Color in
this section.
Go to Replacing the
Supplies in the
Maintenance section.
Go to Replacing the Toner
Cartridges in the
Maintenance section.
Go to the Cleaning
Procedures in the
Maintenance section.
Go to Replacing the
Print/Copy Cartridge in the
Maintenance section.
Clean the Document Glass,
and make 50 blank copies.
If the problem still exists,
call for service.
Go to Replacing the
Print/Copy Cartridge in the
Maintenance section.
Call for service.
Go to Replacing the
Print/Copy Cartridge in the
Maintenance section.
95