Table of Contents
Advertisement
Tools Mode
Sound Preset
The DP-C106 emits tones when it is in certain conditions. These tones alert
you when the Copier/Printer has reached a certain state.
The following Audio Tone selections are available on the DP-C106:
Valid Tone: An entry can be made so that a tone is produced when the
buttons of the control panel are pressed accurately.
Invalid Tone: An entry can be made so that a tone is produced when
copying ends abnormally, such as when paper runs out or there is a
paper or document jam.
Job Complete Tone: An entry can be made so that a tone is produced
when copying ends.
Ready Tone: An entry can be made so that a tone is produced when the
machine shifts from energy saver status to the use status.
Alarm CRU Tone: An entry can be made so that a tone is produced when
the toner cartridge or drum cartridge requires replacement.
Use the following procedure to change the Audio Tone settings:
1.
Press the Tools button to display the Tools Main Menu on the Copier
Screen.
2.
Using the (
3.
Press the Select button. Password Input is displayed on the Copier
Screen.
4.
Using the Numeric Keypad, enter your Administrator Password. The
numbers display as asterisks (*).
If you make a mistake while entering a password, press the Clear button.
5.
Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
62
) ARROW buttons highlight the Admin menu selection.
Advertisement
Table of Contents
