Table of Contents
Advertisement
5
The following list shows the types of problems identified in this chapter:
Jam Clearance
Copy/Print Quality Problems
Power Problems
Printer Error Messages
Printer Error Codes
Scanner Error Messages
Avoiding Paper Jams
The following conditions cause jams in the Printer.
The paper guides in the paper tray are not adjusted to the size of the
paper. Refer to the Loading Paper in the Paper Tray procedure in the
Setting Up the DP-C106.
The Automatic Document Feeder (ADF) document guides are not
adjusted to the size of the documents. Refer to the Automatic Document
Feeder information in the Setting Up the DP-C106.
Transparencies are incorrectly loaded in the Bypass Tray. Refer to the
Loading Transparencies into the Bypass Tray procedure.
Paper not recommended is used. Please use paper weight from 14 to 23
lbs. for Trays and 14 to 48 lbs. for Bypass Tray.
Whenever possible, load paper to feed long edge first.
CAUTION
DO NOT open the Duplex Unit/Kit unless directed to do so from the Printer
Control Panel. Opening the Duplex Unit/Kit at any other time could create a
paper jam.
Problem Solving
69
Advertisement
Table of Contents
