Table of Contents
Advertisement
Copy Features
7.
Use the (
The Copier Screen displays an error message if the 2 Up feature is on when
you try to switch the 2-Sided feature on. For information on using the 2 Up
feature, see "Using the 2 Up Feature."
8.
Press the Select button. One of the following happens:
9.
Using the (
10. Using the Numeric Keypad, enter the number of originals loaded in the
ADF.
11. Press the Select button. 2-Sided selection is displayed on the Copier
Screen.
12. Press the Exit button. The Main Screen is displayed on the Copier
Screen.
13. Enter your desired number of copies using the Numeric Keypad.
14. Press the Start button.
44
) ARROW buttons to highlight one of the following:
OFF to turn the 2-Sided feature off.
Long Edge Binding to flip the images along the long edge of the
output. This feature prints the top of the long edge side 1 image on
the same edge of the page as the top of the side 2 image. For
Portrait documents, this creates a book effect. For Landscape
documents, this creates a landscape effect.
Short Edge Binding to flip the images along the short edge of the
output. This feature prints the top of the side 1 short edge image on
the opposite edge of the page from the top of the side 2 image. For
Portrait documents, this creates a calendar effect. For Landscape
documents, this creates a book effect.
If you selected OFF, Advanced Features selection is displayed on
the Copier Screen. Skip to step 12.
If you selected Portrait or Landscape, Page Count is displayed on
the Copier Screen.
) ARROW buttons, select one of the following:
Number – to manually enter the number of originals.
Auto Count – to have the copier detect the number of originals.
Skip to step
12.
Advertisement
Table of Contents
