Table of Contents
Advertisement
Cleaning Procedures
Cleaning the Document Feeder (ADF)
Document jams can be created by dirt on the feed rollers or the feed belt of
the ADF. It is recommended that you clean the feeder once a month.
1.
Lift the ADF.
2.
Moisten a clean soft cloth with water and wipe the feed belt.
3.
Wipe dry with a clean and dry soft cloth.
CAUTION
Use care when pulling the feed belt. Always pull it evenly and firmly toward
the Right-hand side of the Scanner.
a.
b.
c.
When the visible area is clean, grasp the top and bottom edges of
the feed belt and carefully pull it in the Right-hand direction.
Clean the new area.
Repeat step 3 until the entire belt is clean.
Maintenance
135
Advertisement
Table of Contents
