Table of Contents
Advertisement
activated (page 61). For an explanation of error
messages, see page 80.
6.1.2 Using the automatic document feeder
{Fax}
{Monitor}
{Quick Scan}
1
If the {Fax} light is OFF, turn it ON by pressing
{Fax}.
2
Set the original (page 20).
3
If necessary, change the resolution and contrast
according to the type of document.
L To select the resolution, see page 44.
L To select the contrast, see page 44.
4
{Monitor}
5
Dial the fax number. i {Black}
Note:
L To stop sending, see page 77.
L Do not open the document cover when sending a fax
with the automatic document feeder.
Pre-dialling a fax number
1. Enter the fax number.
2. Set the original (page 20). i {Black}
Sending from memory (Quick scan feature)
1. Set the original (page 20).
2. Enter the fax number. i {Quick Scan}
{Black}
6.2 Storing items for the one-
touch dial feature and navigator
directory
The unit provides the one-touch dial feature (6 items)
and navigator directory (300 items).
L Station 1 and 2 can be used alternatively as
broadcast keys (page 47).
L Make sure that the {Fax} light is ON.
{Directory}
{Menu}
{Fax}
{Set}
Station keys
{Lower}
6.2.1 Storing one-touch dial item
1
Press {Menu} repeatedly to display "DIRECTORY
SET".
2
Select the desired station key.
For stations 1–2:
1. Press one of the station keys.
Example:
2. {Set}
For station 3:
Press the station key.
For stations 4–6:
Press {Lower}, then press one of the station keys.
3
Enter the name, up to 16 characters (see page 75 for
character entry). i {Set}
4
Enter the telephone number, up to 32 digits. i
{Set}
L To program other items, repeat steps 2 to 4.
5
{Stop}
Note:
L A hyphen or a space entered in a telephone number
counts as 2 digits.
6.2.2 Storing navigator directory items
1
Press {Menu} repeatedly to display "DIRECTORY
SET". i {>}
2
Enter the name, up to 16 characters (see page 75 for
character entry). i {Set}
6. Fax
{Stop}
{V}{^}{>}
STATION 1
DIAL MODE
[V^]
45
Advertisement
Table of Contents
