Table of Contents
Advertisement
Copy Features
Loading Envelopes in the Bypass Tray
All envelopes must be fed through the Bypass Tray. Open the flap and insert
the envelope, one at a time, into the Bypass Tray as shown below.
Follow these guidelines when printing onto envelopes to help minimize
potential jams and other problems:
30
Do not use envelopes that have tape seals. If you are using
an envelope with a glue seal, make sure it is dry before use.
Only use landscape (horizontal) type envelopes (more than
3.5 inches wide, and more than 5.6 inches long with the flap
open). Portrait (vertical) type envelopes may not be used.
Insert envelopes with the flap facing out and the glue side
down.
Poor quality envelopes may crease, and may not print
properly.
0302508A- W O L
Advertisement
Table of Contents
