Table of Contents
Advertisement
10 Bin Sorter Error Messages
10 Bin Sorter Error Messages
Message
A3-Ov is not available with
Sorter. Select top tray.
Check printer panel and remove
papers
Check Sorter position
Clear Jam in Sorter
Close Sorter Cover
Combination of this paper and
Sort or Stack is not available
Empty Sorter bins
Invalid for High Cap Tray
Invalid for Sort
Cause and Solution
The paper size selection you made for the job, for
example, 12 x 18 inches, is not valid. Redirect the
job to the printer Top Tray or change the output
paper size so the job may be sent to the 10 Bin
Sorter.
Follow jam clearance procedures for the 10 Bin
Sorter and the DP-C106. For complete jam
clearance procedures for the DP-C106, refer to the
DP-C106 user documentation CD.
The 10 Bin Sorter is not in place. Move the unit to
the right, adjacent to the DP-C106.
There is a paper jam in the 10 Bin Sorter. Follow the
jam clearance procedures to clear the jam in the 10
Bin Sorter. You may also be instructed to clear jams
from other areas of the Copier/Printer.
The 10 Bin Sorter Cover is not in place. Ensure that
the cover is completely closed.
The paper selection (size or type) you made for the
job is not valid. Redirect the job to the Top Tray or
change the paper size or type selection so the job
may be sent to the 10 Bin Sorter.
This message is displayed at the conclusion of every
job sent to the 10 Bin Sorter. It is also displayed
when bin capacity has been reached. Remove the
sheets from the bins and continue copying.
The selections (such as paper size) you made for the
job are not valid for output to the high capacity bin.
Redirect the job to the Top Tray or change the
selections so the job may be sent to the high
capacity bin.
The selections (such as paper size) you made for the
job are not valid for sorting. Redirect the job to the
Top Tray or change the selections so the job may be
sent for sorting.
Problem Solving
109
Advertisement
Table of Contents
