Copy Mode - Panasonic WORKIO DP-C106 Operating Instructions Manual

Copy Mode

The default setting for the DP-C106 is the printer mode. To make a copy you
must change the Copier/Printer to the copier mode.
When the DP-C106 Copier/Printer is in the printer mode, a message displays
in the Copier Screen that says
This message is referring to the Copy button on the Copier Control Panel.
After you press the Copy button, one of the following occurs:
The Ready to Copy message appears on the Copier Control Panel
indicating that you have successfully entered copy mode. The copier is
ready to begin processing jobs.
If the User Password option is enabled, the Copier Control Panel
prompts you to enter your user password.
Enter your password using the Numeric Keypad. If you enter the wrong
number, press the Clear button.
If your password is correct, the Ready to Copy message automatically
appears on the Copier Screen. This indicates that you have
successfully entered copy mode. The copier is ready to begin
processing jobs.
If you entered an incorrect password, the Incorrect Password message
appears and the copier prompts you to enter your password again.
For information on Setting Up or Changing the User Password, see the
Tools Mode.
Using the Auto Mode Change feature enables the DP-C106 Copier/Printer to
automatically enter the copy mode when originals are loaded in the ADF.
For more information on the Auto Mode Change feature, go to the Tools
Mode.
To Enter Copy Mode Press Copy Button
Basic Copying
13