Table of Contents
Advertisement
Tools Mode
Version Information
If you should ever run into problems with your DP-C106 and have the need to
call for service, you may need to provide your software version information to
the service engineer helping you. You can access all software version
information through Tools Mode.
Use the following procedure to access Version Information:
1.
Press the Tools button to display the Tools Main Menu on the Copier
Screen.
2.
Using the (
3.
Press the Select button. Password Input is displayed on the Copier
Screen.
4.
Using the Numeric Keypad, enter your Administrator Password. The
number displays as an asterisk (*).
If you make a mistake while entering a password, press the Clear button.
5.
Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
6.
Use the (
selection.
7.
Press the Select button. The Version Information screen is displayed on
the Copier Screen.
8.
All version information for the copier software and for all installed options
is listed on the Version Information screen.
9.
Press the Exit button. The Administrator Menu is displayed.
10. Press the Exit button. The Tools Main Menu is displayed on the Copier
Screen.
11. Press the Tools button to exit Tools Mode.
66
) ARROW buttons highlight the Admin menu selection.
) ARROW buttons to highlight the Version Information
Advertisement
Table of Contents
