Table of Contents
Advertisement
Tools Mode
Timer Preset
The DP-C106 has time limits for certain conditions. In Tools Mode, you can
change the timer settings for the following options:
Auto Reset: If the Copier/Printer is not operated within a designated
amount of time, the machine returns to print mode. The time-out before
returning to print mode can be 1 – 4 minutes.
Reset Time: When the DP-C106 is in an error condition, the error
message automatically returns to the main screen after a certain time.
This allows printing to resume. The reset time for when the original
screen will display after an error message can be 1 – 120 minutes. To
use copy mode, the error condition will have to be addressed. To clear
error conditions, refer to the problem solving section.
Energy Saver Time: If the copier is not operated for a designated amount
of time, the copier will enter energy-saving mode. The time out before
changing to the energy saving mode can be 1 – 60 minutes.
Use the following procedure to change the timer settings:
1.
Press the Tools button to display the Tools Main Menu on the Copier
Screen.
2.
Using the (
3.
Press the Select button. Password Input is displayed on the Copier
Screen.
4.
Using the Numeric Keypad, enter your Administrator Password. The
numbers display as asterisks (*).
If you make a mistake while entering a password, press the Clear button.
5.
Once the correct password is entered, the Admin menu is displayed on
the Copier Screen.
60
) ARROW buttons highlight the Admin menu selection.
Advertisement
Table of Contents
