Storing Items For The One-Touch Dial Feature And Phonebook - Panasonic KX-MB2085CX Operating Instructions Manual

6. Fax
6.1.2 Using the automatic document feeder
MFAXN MMONITORN
MQUICK SCANN
1
If the MFAXN light is OFF, turn it ON by pressing
MFAXN.
2
Set the original (page 20).
3
If necessary, change the resolution and contrast
according to the type of document.
R To select the resolution, see page 39.
R To select the contrast, see page 39.
4
MMONITORN
5
Dial the fax number.
6
When a fax tone is heard:
Press MSTARTN.
When the other party answers your call:
Lift the handset and ask them to press their start
button. When the fax tone is heard, press MSTARTN.
Note:
R After pressing MSTARTN, you can replace the
handset.
R To stop sending, see page 78.
R Do not open the document cover when sending a fax
with the automatic document feeder.
Pre-dialling a fax number
1. Enter the fax number.
2. Set the original (page 20). A MSTARTN
Sending from memory (Quick scan feature)
1. Set the original (page 20).
2. Enter the fax number. A MQUICK SCANN
6.2 Storing items for the
one-touch dial feature and
phonebook
The unit provides the one-touch dial feature (6 items) and
phonebook (100 items).
R Station 1 and 2 can be used alternatively as
broadcast keys (page 42).
40
R Make sure that the MFAXN light is ON.
MFAXN
MPHONEBOOKN
MSTARTN
6.2.1 Storing one-touch dial item
1
Press MMENUN repeatedly to display "PHONEBOOK
SET".
2
Select the desired station key.
For station 1-2:
1. Press one of the station keys.
2. Press MCN or MDN repeatedly to select "DIAL
MODE". A MSETN
For station 3:
Press the station key.
For station 4-6:
Press MLOWERN, then press one of the station keys.
3
Enter the name, up to 16 characters (see page 76
for character entry). A MSETN
4
Enter the telephone number, up to 32 digits. A
MSETN
R To program other items, repeat steps 2 to 4.
5
MSTOPN
Note:
R A hyphen or a space entered in a telephone number
counts as 2 digits.
6.2.2 Storing phonebook items
1
Press MMENUN repeatedly to display "PHONEBOOK
SET". A MEN
2
Enter the name, up to 16 characters (see page 76
for character entry). A MSETN
3
Enter the telephone number, up to 32 digits. A
MSETN
R To program other items, repeat steps 2 to 3.
4
MMENUN
Note:
R A hyphen or a space entered in a telephone number
counts as 2 digits.
6.2.3 Editing a stored item
1
MPHONEBOOKN
Station keys MMENUN
MLOWERN MSETN
MSTOPN
MCNMDNMEN