Email Abbr Programming Errors; Error Messages Sent To The Sender - Panasonic DP-8020P Operating Instructions Manual

Error Messages Sent to the Sender

Error messages that are emailed from your machine to the original sender during remote programming of the Auto
Dialler via email.
1 554 Data transfer error (broken header)
2 554 Data transfer error (broken data)
3 554 Data transfer error (FAX module)
4 554 MIME attachment not supported
(message/file)
5 554 MIME format not supported
6 554 G3 relay permission denied
7 554 Relay address unknown
8 554 Memory full (FAX module)
9 554 Data transfer error
172
Problem Solving

Email ABBR Programming Errors

Error Message Possible Cause / Action
The header or sub header decoding is being processed while the
message finished, try again.
Multiple contents are present and being processed while the
message finished, try again.
Data transfer error occurred in the FAX module while communicating
with the LAN module, try again.
MIME attachment is not supported during this operation, resend
using plain text in the message body only.
MIME file type is not supported, resend using plain text in the
message body only.
The requested domain for Relayed XMT is not registered.
The telephone number of end receiving station for the Relayed XMT
is unknown.
FAX Memory is full, try again later.
Other errors not listed above, try again later.