Table of Contents
Advertisement
installation
ACCESSORIES
Depending on the model that you have purchased, you are supplied with
several accessories that can be used in a variety of ways.
1. Roller ring, to be placed in the centre of the oven.
Purpose: The roller ring supports the turntable.
2. Turntable, to be placed on the roller ring with the
centre fitting on to the coupler.
Purpose: The turntable serves as the main cooking
3. High rack, Low rack, to be placed on the turntable.
Purpose: The metal racks can be used to cook two
DO NOT operate the microwave oven without the roller ring and
turntable.
MC28A5013AK_TL_DE68-04698D-00_EN.indd 9
MC28A5013AK_TL_DE68-04698D-00_EN.indd 9
surface; it can be easily removed for
cleaning.
dishes at the same time. A small dish may
be placed on the turntable and a second
dish on the rack. The metal racks can be
used in grill, convection and combination
cooking.
INSTALLATION SITE
• Select a flat, level surface approx. 85 cm above the
floor. The surface must support the weight of the
oven.
• Secure room for ventilation, at least 10 cm from the
rear wall and both sides, and 20 cm from above.
• Do not install the oven in hot or damp surroundings,
such as next to other microwave ovens or radiators.
• Conform to the power supply specifications of this oven. Use only
approved extension cables if you need to use.
• Wipe the interior and the door seal with a damp cloth before using your
oven for the first time.
TURNTABLE
Remove all packing materials inside the oven.Install the
roller ring and turntable. Check that the turntable rotates
freely.
English - 9
20 cm
20 cm
10 cm
10 cm
above
above
behind
behind
85 cm of
85 cm
10 cm on
10 cm on
the floor
the floor
the side
the side
3/7/2022 10:38:58 AM
3/7/2022 10:38:58 AM
Advertisement
Table of Contents
