Writing, Formatting And Erasing The Micro Memory Card - Siemens SIMOTION C 230-2 Operating Instructions Manual

Commissioning

8.4 Writing, formatting and erasing the Micro Memory Card

Initial Power ON
Switch on the power supply module.
• The 24 VDC LED on the power supply module is illuminated.
• On the SIMOTION C:
– The 5 VDC LED illuminates.
– All other LEDs light up briefly (approx. 2 seconds).
8.4 Writing, formatting and erasing the Micro Memory Card
Writing the micro memory card of SIMOTION C
You can write to the micro memory card as follows:
• Micro memory card is inserted in the SIMOTION C and is written with the "Copy RAM to ROM"
menu command (there must be a connection between the programming device and
SIMOTION C).
You can store the technology packages and user data (programs, configuration data,
parameter assignments) on the micro memory card (see SIMOTION SCOUT online help).
• Write to the micro memory card on the PG or PC.
You can write to the micro memory card directly via a PC using a suitable memory card
adapter.
This function is required for updating the SIMOTION C.
You can write the user project with SIMOTION SCOUT and the menu command "Load to file
system" directly from the PC to the memory card (micro memory card). To do this, select the
device in the project navigator and execute the "Load to file system" command in the context
menu.
140
Note
For C230-2
With an empty micro memory card, the SIMOTION Kernel on the C230-2 is copied to the
micro memory card during power-up. This increases the duration of the power-up by
about 1.5 minutes.
For C240 / C240 PN
If a micro memory card is not inserted in the C240 or if the micro memory card does not
contain a SIMOTION Kernel, all LEDs except the RUN LED are illuminated on the SIMOTION
C240.
Operating Instructions, 11/2022, A5E33441428B
SIMOTION C