Residual Risks Of Power Drive Systems - Siemens SIMOTION C 230-2 Operating Instructions Manual

Standards, Certificates and Approvals
A.2 Residual risks of power drive systems
You can find further information on the respective device on the Internet at http://
database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm Enter the first seven
characters of the article number at Keyword. Then click Search.
EMC limits in South Korea
KC registration number: KCC-REM-S49-SIMOTION
For sellers or other users, please keep in mind that this device in an A-grade electromagnetic wave device.
This device is intended to be used in areas other than home.
The EMC limits to be observed for Korea correspond to the limits of the EMC product standard
for variable-speed electric drives EN 61800-3 of category C2 or the limit class A, Group 1
according to EN 55011. By implementing appropriate additional measures, the limit values
according to category C2 or limit value class A, Group 1, are observed. Additional measures, such
as the use of an additional RFI suppression filter (EMC filter), may be necessary.
The measures for EMC-compliant design of the system are described in detail in this manual
respectively in the Installation Guideline EMC.
Note that the final statement on compliance with the standard is provided by the respective label
attached to the individual unit.
Declaration of conformity
The current Declaration of conformity is available on the Internet at Declaration of conformity
(https://support.industry.siemens.com/cs/ww/en/ps/14506/cert).
RCM (C-Tick)
AUSTRALIA
A.2

Residual risks of power drive systems

Residual risks of power drive systems
The control and drive components of a drive system are approved for industrial and commercial
use in industrial line supplies. Their use in public grids requires a different configuration and/or
additional measures.
These components may only be operated in closed housings or in higher-level control cabinets
with protective covers that are closed, and when all of the protective devices are used.
176
This product meets the requirements of the AS/NZS CISPR 22.
Operating Instructions, 11/2022, A5E33441428B
SIMOTION C