Siemens SIMOTION C 230-2 Operating Instructions Manual page 89

Assigning the slot numbers
After mounting, you can assign each module a slot number. This eases the assignment of the
modules to the configuration table in the Engineering System. The table below shows the slot
number assignment.
Table 5-7
Inserting slot numbers
This figure shows the proper way of inserting the slot numbers. The slot number labels are
included with the SIMOTION C.
Figure 5-8
SIMOTION C
Operating Instructions, 11/2022, A5E33441428B
Slot numbers for S7 modules and SIMOTION C
Slot no.
1
2
3
4
5
6
7
8
9
10
11
Inserting slot numbers on the modules
Module
Power supply (PS)
SIMOTION C
Reserved
1. I/O module
2. I/O module
3. I/O module
4. I/O module
5. I/O module
6. I/O module
7. I/O module
8. I/O module
Configuring and installing
5.3 Installing
Comments
-
-
-
To the right of SIMOTION C
-
-
-
-
-
-
-
89