Siemens SIMOTION C 230-2 Operating Instructions Manual page 13

Unexpected movement of machines caused by radio devices or mobile phones
The use of radio devices or mobile telephones in the immediate vicinity of the components can
result in equipment malfunction. Malfunctions may impair the functional safety of machines
and can therefore put people in danger or lead to property damage.
• If you come closer than around 2 m to such components, switch off any radios or mobile
• Use the "SIEMENS Industry Online Support app" only on equipment that has already been
Fire due to inadequate ventilation clearances
Inadequate ventilation clearances can cause overheating of components with subsequent fire
and smoke. This can cause severe injury or even death. This can also result in increased
downtime and reduced service lives for devices/systems.
• Ensure compliance with the specified minimum clearance as ventilation clearance for the
NOTICE
Overheating due to inadmissible mounting position
The device may overheat and therefore be damaged if mounted in an inadmissible position.
• Only operate the device in admissible mounting positions.
Unrecognized dangers due to missing or illegible warning labels
Dangers might not be recognized if warning labels are missing or illegible. Unrecognized
dangers may cause accidents resulting in serious injury or death.
• Check that the warning labels are complete based on the documentation.
• Attach any missing warning labels to the components, where necessary in the national
• Replace illegible warning labels.
SIMOTION C
Operating Instructions, 11/2022, A5E33441428B
WARNING
phones.
switched off.
WARNING
respective component.
WARNING
language.
Fundamental safety instructions
1.1 General safety instructions
13