Siemens SIMOTION C 230-2 Operating Instructions Manual page 38
Hide thumbs
Also See for SIMOTION C 230-2:
- Operating instructions manual (196 pages) ,
- Equipment manual (162 pages)
Table of Contents
Advertisement
Description
2.6 Versions of SIMOTION C
Instead of the onboard drive and measuring system interfaces, the C240 PN has a PROFINET
interface with three ports (X11 P1, X11 P2, X11 P3).
The following table lists the differences between the individual motion controllers:
Table 2-4
Differences between C230-2, C240 and C240 PN
Article No. of the module
Article No. of the Micro
Memory Card (MMC)
Uses of the analog drive in‐
terface (X2)
Filter time for analog outputs •
Repeatability when using
the outputs as fast output
cams (X1)
Use of the inputs (X1: B1...
B4)
Use of measuring system in‐
terface (X3 to X6)
Mode selector (hardware)
PROFINET interface (X11)
Note
In order to take the different versions into account, the product will be referred to in this manual
as "SIMOTION C". Specific product designations will be used for information that applies only to
one product version, e.g. for SIMOTION C230-2, C240 or C240 PN.
38
C230-2
6AU1 230-2AA01-0AA0
6AU1 700-0AA02-0AA0
Note: The MMC of the C240 / C240 PN cannot be operated in the C230-2 and vice-versa.
•
For analog drives
•
For stepper drives
With filter (C230-2-
compatible)
140 µs
•
As digital inputs
•
For external zero mark
signals
•
Encoder connection
Key-operated switch
Switch positions:
•
RUN
•
STOPU
•
STOP
•
MRES
Not available
C240
6AU1 240-1AA00-0AA0
6AU1 720-1KA00-0AA0
Note: The MMC of the C240 and the C240 PN are identical.
•
For analog drives
•
For stepper drives
•
For standard outputs (analog/digi‐
tal outputs)
•
With filter (C230-2-compatible)
•
Without filter
70 µs
•
As digital inputs
•
For external zero mark signals
•
Measuring pulses for global meas‐
uring (in addition to inputs M1 and
M2 for local measuring)
•
Encoder connection
•
Counter input
Toggle switch
Switch positions:
•
RUN
•
STOP
•
MRES
Not available
Operating Instructions, 11/2022, A5E33441428B
C240 PN
6AU1 240-1AB00-0AA0
•
Not available
•
Not available
70 µs
•
As digital inputs
•
Measuring pulses for
global measuring
•
Not available
Toggle switch
Switch positions:
•
RUN
•
STOP
•
MRES
3x PROFINET
X11 P1, X11 P2, X11 P3
SIMOTION C
Advertisement
Table of Contents
