Setting Up Your System
Phone-Based System Setup
Trimble Placer GPS 455 with Dead Reckoning
The setup for the Trimble Placer GPS 455 with Dead Reckoning is shown in
Figure
2-22.
Before you begin the hardware installation procedure, please review
"Hardware Installation Tips" on page
21.
86154A option 210 provides a Trimble Placer GPS 455 receiver and two GPS
antennas. All necessary cables and adapters are included. The speedometer
interface is not included. If the Trimble Placer GPS 455 receiver and GPS
antennas are customer supplied, 86154A option 212 (adapter and cables) is
required.
Figure 2-22 Trimble Placer GPS 455 with Dead Reckoning and Phone
88
Agilent Wireless Solutions