Rs-232 To Gps Unit Cable Configuration - Agilent Technologies E7474A Getting Started Manual

Setting Up Your System

RS-232 to GPS Unit Cable Configuration

RS-232 to GPS Unit Cable Configuration
Figure 2-31 is supplied in case the GPS unit you are using is different from
those described in this guide. The Agilent Wireless Solutions Software can
usually operate any GPS unit employing the TAIP, TSIP, or NMEA protocols.
NOTE
1PPS must be provided on Pin 9 for CDMA Pilot and Code-Domain Power
measurements, to be accurate and stable.
Figure 2-31 RS-232 Cable Connecting the Agilent E645x Receiver to a GPS Unit
110 Agilent Wireless Solutions