Verifying the System
Method 3: Measuring the Noise Floor
NOTE
The measurement is making 100 averages, which will require approximately
three minutes to stabilize the noise level. After completion, stop the
measurement and note the levels.
Passing the Test
You have passed the if the average noise level is below –122 dBm.
Now continue with the
Procedure" on page
tests, refer to
additional information.
Agilent Wireless Solutions
"Method 4: GPS Measurement Verification
152. If you are having problems with setting up these
"Solving Problems and Updating Your System" on page 157
for
151