NOTE
Starting and Learning to Use the Software
Selecting GPS Hardware
Selecting GPS Hardware
The Agilent Wireless Solutions Software is designed to support several types
of GPS hardware. The application must be configured for your system in
order to operate correctly. The following procedure describes how to select
the appropriate GPS hardware.
If you are unsure of your GPS communication protocols and configuration,
use the automatic configuration wizard to set up your GPS. Refer to
"Automatic Configuration" on page
Do This
1 Set up the hardware.
2 Turn on the hardware.
3 Turn on the PC and run the Agilent Wireless
Solutions Software.
4 Create or select a Project.
5 Select Configuration mode.
6 Select the Hardware tab.
7 Select GPS, then click Modify, or double-
click the GPS icon.
120
23.
See This
"Setting Up Your System" on page 19
hardware configuration.
"Setting Up Your System" on page 19
hardware configuration.
See
"Starting the Agilent Wireless Solutions
Software" on page
119.
Project name appears in the field.
You switch to Configuration mode.
See
Figure
3-1.
You can now select the appropriate GPS protocol.
See
Figure
3-2.
Agilent Wireless Solutions
for your
for your