Rx Loop In/Out Cable Configuration - Agilent Technologies E7474A Getting Started Manual

Setting Up Your System

RX Loop In/Out Cable Configuration

RX Loop In/Out Cable Configuration
Figure 2-32 shows the pin-out numbers for the cable used to connect
receivers, in a multiple receiver setup. Connections are made between the
Rx Loop in and Rx Loop out of the Agilent E645x receivers. The pin-out
numbers apply to both the short and long cables.
Figure 2-33 Cable Connecting the Agilent E645x Receiver to Another Agilent E645x
Receiver
112 Agilent Wireless Solutions