Setting Up Your System
Receiver-Based System Setup
Trimble Placer GPS 455
The setup for the receiver with a Trimble Placer GPS 455 receiver is shown in
Figure
2-6.
Before you begin the hardware installation procedure, please review
"Hardware Installation Tips" on page
21.
If the Trimble Placer GPS 455 receiver is supplied by Agilent as option 210,
all necessary cables are included. If the Trimble Placer GPS 455 receiver is
customer supplied, 86154A option 212 is required.
Figure 2-6 Trimble Placer GPS 455
36
Agilent Wireless Solutions