Multiple Phones (Option 150) - Agilent Technologies E7474A Getting Started Manual

Setting Up Your System
Configuring Multiple Receivers and Phones

Multiple Phones (Option 150)

The Wireless Solutions system supports up to four phones. The phones attach
to the computer via a PCMCIA card (see
recommends and supports the Socket™ I/O
provides two phone connectors. Refer to the User's Guide that comes with the
card for installation instructions. To attach four phones, you will need two
Socket™ Port Ruggedized Serial I/O cards and your computer must have two
PCMCIA slots.
NOTE
NT 4.0 does not support two serial I/O cards.
Agilent 86154A option 036 can also provide four RS-232 Serial ports through
a Universal Serial Bus (USB) adapter.
NOTES
Be advised that when you add two cards, more resources are required than
many laptops have. It is possible that you will experience slowdowns or even
crashes. Please refer to
Problems" on page 159
and
on page 68
To operate multiple phones and receivers, you must be running version
A.03.01 of the software or later and have the appropriate multiple resource
license security key.
Before you begin the hardware installation procedure, please review
"Hardware Installation Tips" on page
1.
Agilent Wireless Solutions
"Troubleshooting Resource, GPS, or, COM Errors
for recommendations on how to avoid this situation
"General Hardware Specifications and Minimum System Requirements"
for minimum PC requirements.
™ Port Ruggedized Serial I/O
The Socket
Communications, Inc.
Figure 2-26). Agilent Technologies
1
card (86154A option 020) which
21.
card is produced by Socket
99