Block Unwanted Fax Numbers; To Block Unwanted Fax Number From The Printer Control Panel - Ricoh IJM C180F User Manual

Block unwanted fax numbers

If you subscribe to a caller ID service through your phone provider, you can block specific fax numbers so the
printer does not receive faxes received from those numbers. When an incoming fax call is received, the printer
compares the number to the list of junk fax numbers to determine if the call should be blocked. If the number
matches a number in the blocked fax numbers list, the fax is not received. (The maximum number of fax
numbers you can block varies by model.)
NOTE: This feature is not supported in all countries/regions. If it is not supported in your country/region, Junk
Fax Blocking does not appear in the Preferences menu.
NOTE: If no phone numbers are added in the Caller ID list, it is assumed that you are not subscribed to a
Caller ID service.
You can block specific fax numbers by adding them to the junk fax list, unblock these numbers by removing
them from the junk fax list, and print a list of blocked junk fax numbers.

To block unwanted fax number from the printer control panel

To add a number to the junk fax list
1. From the printer control panel display, touch Fax.
2. Touch Setup.
3. Touch Preferences.
4. Touch Junk Fax Blocking.
5.
Touch
6. Do one of the following:
• To select a fax number to block from the call history list, touch
• Manually enter a fax number to block, and touch Done.
NOTE:
number that appears on the fax header of the received fax, as these numbers can be different.
To remove numbers from the junk fax list
1. From the printer control panel display, touch Fax.
2. Touch Setup.
3. Touch Preferences.
4. Touch Junk Fax Blocking.
5. Touch the number you want to remove, and then touch Remove.
96 Chapter 4 Fax
(Plus Sign).
Make sure you enter the fax number as it appears on the control panel display, and not the fax
(Call History).
EN