Ricoh IJM C180F User Manual page 28

Step 2: Add email addresses to the Address Book
1. Open the Embedded Web Server (EWS). For more information, see
2. Click the Scan tab,
3. Enter the PIN from the label on your printer, and click Submit.
NOTE:
4. Click Address Book, and then click Contacts.
5.
Click
-Or-
Click
NOTE:
address to the Address Book.
6. Follow the onscreen instructions. The entry is added to the Contacts Stored on the Printer table.
NOTE:
Step 3: Configure other email options
To configure other email options (such as configuring default SUBJECT and body text that is included in all
email messages sent from the printer, as well as scan settings used when sending email from the printer),
complete the following steps:
1. Open the Embedded Web Server (EWS). For more information, see
2. Click the Scan tab,
3. Enter the PIN from the label on your printer, and click Submit.
NOTE:
4. Click Scan to Email, and then click Email Options.
5. Change any settings, and then click Apply.
16 Chapter 1 Get started
The PIN label can be found inside the front door.
to add a single email address.
to create an email distribution list.
Before you can create an email distribution list, you must have already added at least one email
Contact names appear on the printer's control panel display and in your email application.
The PIN label can be found inside the front door.
Embedded Web Server.
Embedded Web Server.
EN