Ricoh IJM C180F User Manual page 278

Why can't I connect my wireless printer or print over the network?
Check network issues and setup requirements if the printer is not found during software installs or when
wireless print jobs fail.
• Poor network connection: Move the printer and computer or mobile device closer to the wireless router,
and then check if the signal quality improved. Try opening a website to see if the internet connection
is working properly. If Wi-Fi is slow or intermittent, restart the router by disconnecting the power cord,
waiting 15 seconds, and then reconnecting the cord.
• Printer is off or in sleep mode: Touch the control panel menu or press the Power button to wake the
printer and put it in a ready state. Sometimes the printer status might display Offline when it is actually
ready.
• Check the printer connection status: Make sure the wireless signal is on, and the printer is connected
to the same network as your computer or mobile device. If your printer has a light next to a Wireless icon
or button
• Reconnect the printer to the network: Place the printer within range of the Wi-Fi router signal, and then
connect it to the network.
1.
From the printer control panel, touch or swipe down the tab
open the Dashboard, and then touch
2. Touch
3. Touch Wireless Settings.
4. Touch Wireless Setup Wizard.
5. Follow the display instructions to complete the setup.
• Restart devices: Restart the printer and the computer or mobile device to clear possible error
conditions.
• Print a Wireless Test Report: Print and evaluate the report.
1. From the printer control panel, touch or swipe down the tab
open the Dashboard, and then touch
2. Select Reports, and then select Wireless Test Report.
266 Chapter 8 Solve a problem
, make sure the light is on. If it is off or blinks the printer is disconnected from the network.
(Settings).
(Wireless).
(Setup).
at the top of the screen to
at the top of the screen to
EN