Ricoh IJM C180F User Manual page 217

To check the power connection and reset the printer
1. Make sure the power cord is firmly connected to the printer.
1
2
2. Look at the Power button located on the printer. If it is not lit, the printer is turned off. Press the Power
button to turn on the printer.
NOTE:
3. With the printer turned on, disconnect the power cord from the back of the printer.
4.
Unplug the power cord from the wall outlet.
5. Wait at least 15 seconds.
6. Plug the power cord back into the wall outlet.
7.
Reconnect the power cord to the back of the printer.
8. If the printer does not turn on by itself, press the Power button to turn on the printer.
9. Try using the printer again.
EN
Power connection to the printer
Connection to a power outlet
If the printer is not receiving electrical power, connect it to another power outlet.
Get help in this guide 205