Assign Group - E-Mu ProteusX Operation Manual

S
S
By modulating the loop over a single cycle of a square wave, it can be "pulse
width modulated." Other more complex waveshapes can also be modulated
in this way.

Assign Group

This function allows you to assign a certain number of output channels to each voice. By
assigning all voices in the preset to assign groups, important parts can be protected from
being "stolen" by more recently played keys. Or, a voice such as an open high hat can be
assigned to a mono channel so it will be cancelled by a closed high hat. Voices will
rotate within their assigned bin of channels not interfering with other bins. Poly All is
the default mode.
The modes are as follows.
Notes are played polyphonically with dynamic channel assignment, using
Poly All
all 128 channels.
Two bins of 16 channels each. Notes are played polyphonically with
Poly 16 A-B
dynamic channel assignment, using no more than 16 channels.
Four bins of 8 channels each. Notes are played polyphonically with
Poly 8 A-D
dynamic channel assignment, but using no more than 8 channels.
Four bins of 4 channels each. Notes are played polyphonically with
Poly 4 A-D
dynamic channel assignment, but using no more than 4 channels.
Four bins of 2 channels each. Notes are played polyphonically with
Poly 2 A-D
dynamic channel assignment, but using no more than 2 channels.
Nine monophonic channels. Any voices assigned to the same letter
Mono A-I
interrupt each other, but do not affect other voices.
E-MU Systems
E
E
6 - Voice Editor / Synthesizer Level
Modulation Cords
99