Amplifier, Filter & Auxiliary Envelopes; Adjusting The Envelopes - E-Mu ProteusX Operation Manual

Amplifier, Filter & Auxiliary Envelopes
Proteus X contains three envelope generators per voice. The Amplifier Envelope is "hard-
wired" to control the DCA (volume) and cannot go below the zero baseline (0-100).
The Filter and Auxiliary Envelope generators are general purpose envelopes which must
be patched to a destination using a PatchCord. The levels of the Filter and Auxiliary
Envelopes can be programmed between the value range of -100 to +100.
level
time
Key
Down

Adjusting the Envelopes

There are four ways to adjust the envelope parameters:
• Adjust the Time/Level knobs.
• Grab one of the points on the Envelope Display and drag the envelope.
• Position the cursor in the Time or Level numeric fields and type in a time value.
• Position the cursor in the Time numeric field and type in the exact time.
The time values are calculated using time and the vertical distance to the next point.
Time / BPM Select
Amp / Filter / Aux
Selector Buttons
E-MU Systems
Sustain
Key
Released
Envelope
Repeat
Holds here
until key release
Time Controls
Level Controls
6 - Voice Editor / Synthesizer Level
Amplifier, Filter & Auxiliary Envelopes
81