Changing Presets (From Single View) - E-Mu ProteusX Operation Manual

Table of Contents

4 - Multisetup / Global Controls

The Multisetup

There are three views of the Multisetup page. The Multisetup View buttons

change the current view.

• Single....................Displays the preset for the currently selected MIDI channel.

• Channels 1-16 .....Displays the preset, volume and pan for MIDI channels 1-16.

• Channels 17-32 ...Displays the preset, volume and pan for MIDI channels 17-32.

Changing Presets (from Single View)

Single View is the default view when you ﬁrst run Proteus X. This view is convenient for

performing live or when you're only playing one preset at a time. All the main param-

eters for the selected MIDI channel are displayed in Single View and a convenient

Category mode allows you to quickly select presets in a certain category. A close-up of

the current channel settings is shown below.

Single View Close-up

Select All or Select

by Category

Preset

Inc/Dec

Select/View

Preset

Number

Preset

Name

Channel

Volume

To Select Presets by Number

Click on the Preset Increment/Decrement buttons to move up or down the presets

by number.

Highlight the Preset Number ﬁeld and type in the desired preset number.

To Select Presets by Category

Click on the Select Category button. The

pop-up dialog box at right appears.

Select the desired preset category, then press

OK.

Choose Select By Category from the Single

view screen above.

Use the Increment or Decrement buttons to

select presets. Note that only presets of the

selected category are selected.

Select