Table of Contents
Advertisement
1 - Introduction & Installation
Setting up the Preferences
VST Output Buses
This control is only active in the Proteus X VSTi application. This setting allows you to
add additional VST buses (stereo pairs). Proteus X channel outputs can be assigned to
VST buses in the Multisetup, Output field. These outputs are sent to the VST Mixer in
your recording application. You must restart the VSTi for the changes to take effect.
MIDI
This group of preferences allows you to set up the MIDI inputs, adjust the master MIDI
volume and velocity curves and turn the "IntelliEdit" feature on or off.
MIDI Inputs
Channels 1-16, 17-32
The Proteus X can respond to 32 MIDI channels at once. Since there can be only 16
MIDI channels per MIDI cable (or input) two inputs are provided. Set the MIDI Inputs
(Ch. 1-16, Ch. 17-32) to match up to two outputs from your MIDI interface or
sequencer. If you don't need 32 channels you can turn either input off.
IntelliEdit
This control allows you to set the MIDI device for IntelliEdit. Selecting "None" disables
the feature.
When editing sample key ranges or editing voices it is convenient to select the key
position by simply playing your MIDI keyboard. IntelliEdit lets you selectively edit key
ranges using the keyboard when you need to, but blocks keyboard editing when you
may not want it, such as when your keyboard is playing in the background. Here's how
it works.
E-MU Systems
19
Advertisement
Table of Contents
