Getting Started; Exploring The Tree - E-Mu ProteusX Operation Manual

3 - Getting Started

Exploring the Tree

In this section you'll learn how to navigate around Proteus X using the Tree. Don't worry
if you don't know what everything does just yet. Everything will be explained later on.
With the Proteus X application running, a bank is loaded by selecting Open from
1.
the File menu. Click on the Presets Folder in the Tree and a screen, similar to the
one shown below, appears.
Bank
Presets
Folder
Open
Preset
Presets
Samples
Folder
The
Tree
Multisetup
Folder
Sampler/System/Library Tabs
The Tree is the section shown on the left of the screen. There are three tabs at the
bottom of the Tree labeled Sampler, System and Library.
Allows you to see the contents of the current Proteus X bank.
Sampler
This tab gives you access to your entire computer system: PC, hard disks, CD-ROM
System drives, network, etc. Presets, Samples and Multisetups can be browsed, then
Merged into the current Bank. Load Emulator IV banks from this tab.
The Library shows you all Emulator X and Proteus X related files, wherever they
Library may be located on hard disks, CD-ROM or network. Presets, Samples and Multi-
setups can be browsed in the Library, then Merged into the current Bank.
E-MU Systems
Toolbars
List View
3 - Getting Started
Exploring the Tree
E4/E3 CDs use a
proprietary format and
can only be read using
SCSI/ATAPI drives. They
cannot be read using
firewire and USB drives.
29