Table of Contents
Advertisement
4 - Multisetup / Global Controls
The Multisetup
The Current MIDI Channel
Change the current channel by clicking anywhere on the desired horizontal channel
strip. The red indicator displays the currently selected channel number. The MIDI
Controllers change to show the settings of the currently selected MIDI channel.
To Select a Preset:
Click on the Preset Select button for the desired MIDI channel. The Select Preset
1.
dialog box appears.
Click on the presets in the list to audition them. Presets can be viewed by large icon,
2.
small icon, by list, or by detailed list. Presets can also be sorted by name, ID, bank/
program number, or category when in Detail View mode.
To choose a preset, select it and press OK, or double-click on the preset in the list.
3.
To Select a Preset from the Tree:
Set the Current Channel by clicking anywhere on a horizontal channel strip in the
1.
Multisetup window.The channel number turns red, indicating that this is the
current channel.
Choose the preset you want in the tree and Right-Click on its preset icon.
2.
Choose Select on Current Channel. The preset is now selected for that channel.
3.
You can also select a preset for the current channel by simply clicking the preset's
4.
keyboard icon from the tree.
MIDI Channel
Each channel only responds to MIDI data on its particular channel. Use the small
keyboard at the bottom of the window to audition presets on the currently selected
channel. Select the current channel by clicking anywhere on the desired channel strip.
The red indicator displays the currently selected channel number.
Preset Assignment
Assign presets to MIDI channels by clicking on the selector button to the right of the
preset field. A pop-up dialog box appears with the list of presets in the bank. Select a
preset, then click OK to select.
Channel Volume
This control sets the relative volume of the MIDI channel. This is equivalent to MIDI
controller #7 (channel volume) and changes made over MIDI will be shown here.
Channel Pan
This control sets the stereo position of the MIDI channel. This is equivalent to MIDI
controller #10 (channel pan) and changes made over MIDI will be shown here.
Output Assignment
This control selects the Main Output assignment for the MIDI
channel. 100% of the stereo output signal is sent to the selected
output bus.
The number of outputs available in this field depends on the number of stereo channels
your sound card provides. Add ASIO input strips in PatchMix DSP to increase the
number of available outputs. Output destinations will be labeled according to the
PatchMix DSP input strip scribble strip name. The EX session templates in PatchMix
DSP are designed to be used with the Proteus X.
46
Important: The act of
creating PatchMix DSP
ASIO mixer strips makes
them available for Proteus
X. If they are not created in
PatchMix DSP , you won't
see them in the Output
Assignment field.
Proteus X Operation Manual
Advertisement
Table of Contents
