Changing Presets (From Single View) - E-Mu ProteusX Operation Manual

Changing Presets (from Single View)

Single View is the default view when you first run Proteus X. This view is convenient for
performing live or when you're only playing one preset at a time. All the main param-
eters for the selected MIDI channel are displayed in Single View and a convenient
Category mode allows you to quickly select presets in a certain category. A close-up of
the current channel settings is shown below.
Single View Close-up
Select All or Select
by Category
Preset
Inc/Dec
Select/View
Preset
Number
Preset
Name
Channel
Volume
To Select Presets by Number
Click on the Preset Increment/Decrement buttons to move up or down the presets
1.
by number.
Highlight the Preset Number field and type in the desired preset number.
2.
To Select Presets by Category
Click on the Select Category button.
1.
The pop-up dialog box at right appears.
Select the desired preset category, then
2.
press OK.
Choose Select By Category from the
3.
Single view screen above.
Use the Increment or Decrement
4.
buttons to select presets. Note that only
presets of the selected category are
selected.
Changing the Current MIDI Channel
The Current MIDI Channel is simply the MIDI channel you are currently working
with. To change the current MIDI channel, simply increment or decrement the
channel number using the buttons, or click on the channel number and type in the
desired number.
E-MU Systems
Select
Category
Main Output FXA/FXB
Select Enables
Select/View MIDI Channel
MIDI Channel Inc/Dec
Aux Output
Enable
3 - Getting Started
Multisetup Page
E Note that Single View
only changes the display
and does not affect the
currently selected MIDI
mode (i.e. Omni, Poly or
Multi).
Bank/
E The Bank/Program
Program
Display shows the Bank
Display
and Program number
you would use to select
the preset from a
Selected
sequencer.
Category
Channel
Pan
31