1 - Introduction & Installation
Setting up the Preferences
Other Settings
Load Last Bank at Startup - This feature automatically loads the last bank you had
loaded whenever you start the Proteus X application.
Clear clip indicators after 10 seconds - This feature automatically clears the main
output meter clip indicators. If this function is set to Off, the clip indicators will stay on
until you manually click on them.
Appearance Settings in Windows
Adjusting the "Performance Options" in Windows will make the Preference buttons
much easier to read and increase the smoothness when dragging windows around on
the screen.
To Improve the Appearance Settings:
Open the Windows Control Panel. (Start, Settings, Control Panel)
1.
Select System.
2.
Select the Advanced Settings tab.
3.
Under Visual Effects, select Adjust for Best Performance.
4.
Click OK.
5.
22
Proteus X Operation Manual