Received Channel Commands; Special Notes - E-Mu ProteusX Operation Manual

10 - Appendix
MIDI Implementation Chart
(part 2 - Controllers)

Received Channel Commands

Channels number (n) = 0-15. Message bytes are represented in hex. All other numbers
are decimal. Running Status is supported.
Command
Note Off
Note On
Key Aftertouch
Program Change
Channel Aftertouch
Pitch Bend
Real-time Controller
Footswitch
Volume
Pan
All Sound Off
Reset All Controllers
All Notes Off
Omni Mode Off*
Omni Mode On*
Mono Mode On (Poly Off)*
Poly Mode On (Mono Off)*
Bank Select MSB
Bank Select LSB

Special Notes:

• From Omni Mode
• From Poly Mode
• From Mono Mode
• From Multi Mode
180
Message
8n kk vv
9n kk vv
An kk vv
Cn vv
Dn vv
En ll mm
Bn cc vv
Bn cc vv
Bn 07 vv
Bn 0A vv
Bn 78 00
Bn 79 00
Bn 7B 00
Bn 7C 00
Bn 7D 00
Bn 7E 00
Bn 7F 00
Bn 00 bb
Bn 20 bb
Omni Off turns Poly On.
Omni On turns Omni On; Mono On turns Mono On.
Mono Off turns Poly On; Omni On turns Omni On.
Omni On turns Omni On; Omni Off or Mono Off turns Poly On;
Mono On turns Mono On.
All other changes have no effect
Comments
velocity 0 = note off
kk = 0-127 vv = 0-127
0-127
0-127
l = lsb, m = msb
cc = 00-31, 64-95
cc = 64-79, vv ≥ 64 = on
0-127
0=left, 127=right, 64=center
turns all sound off
ignored in omni mode
ignored in omni mode
forces all notes & controls off
forces all notes & controls off
forces all notes & controls off
forces all notes & controls off
bb = bank MSB Go There!
bb = bank LSB Go There!
Proteus X Operation Manual