Modulation Destinations - E-Mu ProteusX Operation Manual

9 - Synthesizer Basics

Modulation Destinations

Modulation Destinations
The Cords section of the Preset Edit module is where you connect sources to destina-
tions. Each cord has an amount control associated with it to control how much
modulation is applied.
Sample
Loop info.
Sample Rate
Key #
LFOs
Velocity
Gate
The Cords screen and the diagram above show how modulation sources are connected
to destinations. The modulation sources can control any of the destinations in the voice.
Note-on modulation sources, such as key, velocity and gate output a single value at
note-on time. Realtime modulation sources such as LFOs, envelope generators and
modulation wheels can be varied continuously.
The possible modulation routings are completely flexible as shown in the diagram
above. Multiple sources can control the same destination, or a single source can control
multiple destinations.
Control
Value
0 63
Control Value Applied
+
63
0
~
0
-63
<
-127 -63
150
Voice
Morph
Filter
Frequency Q
Envelope
Gen.
Envelope
MIDI
Gen.
Controls
127
+
modulation ADDS to the
initial value. (Normal)
127
~
centers around Zero.
(Use for LFOs, Filt. Freq.)
+64
<
modulation SUBTRACTS
from the initial value
0
L
Amp
R
Pan
Envelope
Mod.
Gen.
Proc.
Proteus X Operation Manual