Load A New Bank - E-Mu ProteusX Operation Manual

Another Method of Merging Presets
Simply click (left mouse button) and drag the preset over the Proteus X icon at the
11.
top of the tree. The cursor changes to a plus sign as you pass over the icon. Release
the mouse button and a pop-up progress bar will inform you that the preset is being
loaded.
If you change your mind and don't want to merge the preset after all, choose Undo
12.
from the Edit menu to un-merge the preset.
Continue to Create the Bank
Continue to add presets to your new bank.
13.
Save the bank when you are satisfied.
14.
Alternate Method using the Librarian to find Presets
Select the Library Tab instead of the System Tab in step 3 above.
1.
If you haven't done so already, Update the Library.
2.
Choose presets from the Library, then drag and drop them on top of the Proteus X
3.
icon at the top of the tree.
To Audition and Merge Samples
Samples can also be auditioned and merged.
Locate the Samples Folder
Locate the Samples folder, just below the Presets folder you just opened.
1.
Click on the Proteus X icon in the Tree to view the Multisetup page.
2.
Audition
Select a Sample from the Tree and press the Space Bar on your computer keyboard.
3.
The sample is auditioned from the hard disk.
Press the Space Bar again to Stop auditioning.
4.
You can also audition samples by Right-clicking over the sample and selecting
5.
Audition. Right-click and select Stop Audition to silence audition.
Merge the Samples
Right-click over the sample in the Tree and select Merge from the menu (or press
6.
"M" on your computer keyboard). The sample is added to the current bank.
You can also drag and drop a sample over the Proteus X icon to merge it into the
7.
bank. These "free" samples will have to be assigned to voices in a preset before they
can be played.
If you change your mind and don't want to merge the sample after all, choose Undo
8.
from the Edit menu (or press Cutlers) to un-merge the sample.

Load a New Bank

Load up a new bank in preparation for the next few examples. Load the Proteus
Composer bank located in your Proteus X folder.
Select Open from the File menu, then locate Proteus Composer and click Open.
1.
E-MU Systems
3 - Getting Started
Load a New Bank
E Note: 24-bit samples
are shown as 32-bit
because they are
internally stored and
processed as 32-bit
numbers.
Note: Emulator 4
E
banks are accessed and
loaded from the System
Tab, rather than from the
File menu.
35