Realtime Window - E-Mu ProteusX Operation Manual

5 - Preset Editor
Key Window Page
To Velocity Switch Voices:
In order to velocity switch voices, they must first be assigned to the same key range.
1.
In the Key Window, set the high and low key range of the voices so that they
completely overlap.
Select the Velocity Window button shown below. By default both voices will be
2.
assigned to the full 0-127 velocity range.
Set the velocity range so that each voice has its own velocity range.
3.
(In the example screen on the previous page, a key velocity of 1-35 will play voice 1, a key
velocity of 36-80 will play voice 2, and a key velocity of 81 or above will play voice 3.)
To Velocity Crossfade Voices:
In order to velocity crossfade voices, they must first be assigned to the same key
1.
range. In the Key Window, set the high and low key range of the voices so that they
completely overlap.
Select the Velocity Window button shown above. By default both voices will be
2.
assigned to the full 0-127 velocity range.
Set the Fade parameter for each voice so that as one voice faces out the other fades
3.
in.
Play the keyboard and fine tune the crossfade points for the desired response.
4.

Realtime Window

The Realtime Window allows you to control the volume of a voice using a real-time
controller such as a modulation wheel, a pedal, an LFO or an envelope generator. It
works in a manner very similar to the velocity window except that a realtime controller
is used to control the volume instead of key velocity.
Sample Name
Realtime Range
Selector Buttons
Low & High Range, Crossfades
& Indicators
66
Graphic Display of
Realtime Switch/Fade
Scroll
Bar
Proteus X Operation Manual